Using the Bluetooth Mobile

Bluetooth mobile operation

Link Activation

1. Set up CELL Phone zone

   Ensure the LEVEL control is closed (level at zero) and the CUE/PGM button is in CUE position (released).

2. Enable Bluetooth on the console

   Press and hold the BLT button for ~2 seconds and release as soon as it lights up.
   The LED starts blinking slowly, indicating Bluetooth is active.

3. Enable Bluetooth on the mobile phone

   Turn on Bluetooth on the phone.

   • If previously paired, the connection will be automatically restored in a few seconds.
   • The mobile phone is now linked to the console.

Incoming Call

1. Verify CUE mode

   Check that the CUE/PGM button is in CUE position (released).

   If it’s in PGM, answering the call could accidentally put it on air.

2. Answer the call

   • If Bluetooth is already active, the call can be answered with a short press of the console’s BLT button. In this condition, communication is handled exclusively through the console.
   • If Bluetooth is off on the mobile, you can answer normally and then enable Bluetooth to transfer it to the MiniMixer.
3. Transfer to console

   Once the call is transferred, the line receives program signal (PGM).

4. Off-air conversation

   Press the TALK button in the CELL Phone zone to speak privately with the caller.
   Audio is heard through headphones.

5. Put the call on air

   Press CUE/PGM to switch to PGM and adjust the level with the corresponding knob.

6. End the call

   • With a short press of the BLT button.
   • Or directly from the phone.
7. Resume call on mobile

   You can continue the communication on the phone by switching from Headset (Bluetooth) to Speaker mode.

   

Some Android models show the Headset icon, which transfers the call to the Bluetooth device when active and returns it to the mobile when disabled.
Other phones may display two buttons, a dropdown menu, or other combinations. Consult your device manual.

---

Making a Call from Mobile

1. Configure the mobile

   On the phone, switch Bluetooth mode to Speaker, to initially talk from the mobile itself.

2. Place the call

   Dial and send the call (SEND).

3. Transfer to console

   Switch the phone mode to Headset (Bluetooth) to transfer audio to the MiniMixer.

4. Check console status

   Before transferring, ensure CUE/PGM is in CUE position (released).

   If the button is in PGM, transferring the call could accidentally put it on air.

5. Put the call on air

   Switch CUE/PGM to PGM and adjust the level.

6. End communication

   • Briefly press the BLT button on the console.
   • Or end from the mobile phone.

Conference Not Supported
It is not possible to establish a conference between the landline and Bluetooth line.
Both can be on air simultaneously, but they cannot hear or talk to each other.