Skip to main content

​
Analog Outputs

Each output uses an RJ45 connector that carries left and right signals in a single cable. In some applications, these stereo outputs can be configured as two independent mono channels. For example, UDX telephone line adapters use unbalanced mono outputs to send signals to external communication lines.
Outputs labeled as PGM and/or REC (balanced) deliver the BUS mix by default.Other outputs are assignable and can be configured to deliver any of the mix buses or even redirect inputs (DIRECT OUT)

​
AES3 Digital Outputs

  • Connected using RJ45–RJ45 CAT5 cable and SOL-F3/XLRM adapter.
  • Use the same pin-out as balanced stereo analog outputs, although only the left channel is transmitted.
  • Also support S/PDIF signal connection.
  • Are transformer balanced

​
AES3 Output Assignment in UX24

  • AES-1 → PGM Bus
  • AES-2 → REC Bus
  • AES-3 and AES-4 → Assignable from SETTINGS → OUTPUTS screen

​
AES3 Output Assignment in UX18

  • AES-1 → assignable
  • AES-2 → assignable
VERY IMPORTANT:AES3 OUTPUTS ONLY OPERATE AT 48 kHz.
It is essential to configure the recording device in Windows to 48,000 Hz to avoid compatibility issues. To configure the sample rate in Windows 10:
  1. Open System Settings menu and select Sound.
  2. In Sound Settings, open input device properties.
  3. Enter Additional device settings.
  4. In the Advanced tab, set the sample rate to 48,000 Hz.