Skip to main content
UX18 Pn

​
Channels

UNIDEX UX18 has 18 channels:
  • 10 channels with 100 mm faders and 8 “virtual” channels operated from the touchscreen or via remote web interface.
  • 4 channels can work as groups, to control submixes of virtual channels from mechanical faders.
  • Each channel can be assigned to any input.
  • Channels are configured in three modes: MIC, LINE, or TELCO, which modifies their behavior and functions.
  • They can be assigned to four stereo mix buses: PGM, REC, AUX, and VBUS.

​
Inputs

UX18 features 5 microphone inputs and 13 line inputs (analog and digital).
  • Microphone: 5 mono balanced With 48V phantom power, 4-band parametric equalizer, dynamic compressor, noise gate, and de-esser.
  • Line: 2 stereo balanced With 3-band parametric equalizer.
  • UNIDEX: 8 mono (4 stereo) Balanced inputs configurable as mono or stereo. Allow connecting UDX adapters (microphones, telephone lines, mobile phones via Bluetooth, computers via USB). Include 3-band parametric equalizer, dynamic compressor, and noise gates.
  • USB: 4 stereo playback devices Compatible with ASIO 3.0. Include 3-band parametric equalizer.
  • AES3: 2 stereo digital inputs With 3-band parametric equalizer.
  • Incoming streaming Not an independent input; when activated, it replaces AES3 input #1.
  • External tuner Stereo input for transmission monitoring. Can also be assigned to channels for use as a conventional input.

​
Outputs

There are 9 stereo outputs and monitoring outputs:
  • Program (PGM) Dual balanced analog stereo output.
  • 1 REC output stereo balanced
  • 4 unbalanced stereo (assignable) Can be configured as up to 8 mono outputs. Include mix-minus option for telephone and VoIP communications.
  • USB: 4 stereo recording devices
  • AES3: 2 digital outputs Two of them are assignable to any of the buses.
  • Dual streaming PCM/MP3/OPUS Simultaneous transmission via RTP and Icecast/Shoutcast.

​
Monitoring and intercom

  • Studio monitoring outputs (speakers and headphones).
  • Simplified studio monitoring connection with Solidyne StudioBox bays.
  • Control room monitoring outputs (speakers and headphones).
  • Talk-back to Studio.
  • Selectable talkback microphone: internal (PZM) or external.
  • Reverse talk-back: allows speaking from the Studio to the operator’s CUE (requires Studiobox HD3 or HD5).
  • CUE bus (Pre Fader Level) assignable to any output.

​
External device triggering

Features:
  • 2 GPI
  • 7 GPO open-collector type
Allow triggering:
  • Solidyne Audicom automation
  • Audio processors
  • Other devices with remote control
Activation is programmable (see the corresponding section).