Power Supply

Power supply and grounding

Power Supply

On the left side (viewed from rear) is the DC IN power connector, a tubular connector with 1.8 mm positive pin.

The power supply included with the console is a 90-240V switching power supply, capable of operating with any power grid and tolerating large voltage variations.
It delivers regulated 28 VDC.

It is recommended to use only the power supply provided by Solidyne.

The D612 console does not have a power switch: it remains powered while connected to the power supply and electrical network.

Ground Connection

The ground connection is made through a brass terminal that ensures chassis grounding. Use 2 mm gauge wire connected to a buried copper ground rod.

Recomendación general para puesta a tierra y protecciones

IMPORTANTE

Para evitar daños en los equipos, se deben adoptar las medidas correspondientes de puesta a tierra y protección en las líneas de Internet y telefonía. La garantía no cubre daños ocasionados por descargas atmosféricas (rayos), sobretensiones o fallas en la red eléctrica.